Editor's Choice


Faulhaber motors for Mars

1st Quarter 2018 Editor's Choice Electrical switching & drive systems & components

2020 is the year of the next rover mission to Mars. The main payload of the Russian Proton rocket is the ExoMars rover, developed by the European and Russian Space Agencies (ESA and Roskosmos). The plan is for the vehicle to be equipped with nine measuring instruments, including one that will be mounted on a two metre mast on the rover. The panoramic wide angle camera (WAC) will take stereo images of the planet. The PanCam features two rotating filter wheels which are mounted in front of its wide angle cameras to enable it to take three dimensional images of panoramic landscapes. Three stepper motors from Faulhaber drive the rotation shaft for the filter change system, as well as the focus of the high resolution camera.

The requirements for equipment planned for use on Mars are so stringent that nothing quite compares to them. And if the mission goes according to plan, the rover, built by ESA, will start searching the surface of Mars for past or present biological activity as soon as it lands. Meanwhile, the ExoMars Trace Gas Orbiter will stay in orbit in order to help the rover phone home and ensure that the data it collects make it back to earth.

Improved images and protection from dust

The ambient conditions on Mars require every single piece of equipment to deliver unrivalled performance. For starters, the rover will be working under an atmospheric pressure of 0,00636 bar, which is equivalent to the pressure found at an altitude of 35 kilometres on earth. And temperature fluctuations go from 20 down to -120°C.

With the filters in front of the WACs, the system will be able to take pictures at various wavelengths during the mission and use them to generate images with varying content. “The plan is to send 10 images to earth every day,” says Jonathan Jones, mechanical engineer at the Mullard Space Science Laboratory (MSSL) in London.

Stepper motors position lens filters

With 11 filters per wheel, it is possible for the Pancam WACs to take a wide variety of pictures under various light conditions. These filter wheels rotate in front of the two WACs, and must be brought exactly into position in order to obtain sharp images. For driving the rotating filter system, MSSL makes use of two stepper motors from the Faulhaber PRECIstep portfolio. These two units have been passing the endurance tests currently being conducted on them with flying colours.

During the development process, the MSSL engineers looked for motors that would not only be able to deliver reliable and precise positioning performance, but that would also be extremely compact. Stepper motors were the natural choice given these requirements, as they are not only able to precisely position objects with a resolution of 1280 steps per revolution without the need for a separate feedback system, but are also much sturdier and easier to use than conventional servomotors. The focusing mechanism of the high resolution camera is driven by a Faulhaber PRECIstep stepper motor. “It is the perfect solution for optical application as the motors can hold the lens position even without current thanks to their residual torque. Moreover, the control in open loop gets rid of jittering effects so we obtain very sharp and clear images,” explains Faulhaber PRECIstep, sales manager, Sébastien Vaneberg. “In short, it is a simple and robust drive with outstanding capabilities, ideal for the harsh space conditions.”

Miniature motors approved for use on Mars

In each camera, each drive has a diameter of just 10 mm. The stepper motor counts 20 steps per revolution, and is combined with a precision gearhead of the same diameter with a gear ratio of 64:1. On top of this, Faulhaber worked closely with MSSL to further customise the engineering behind its two drives. The resulting changes include a dry lubricant and custom sintered bearings. “The motors need to be able to survive on Mars,” Jones says.

The MSSL is currently testing the components in conditions even harsher than those on Mars. The positioning drives must complete 5000 positioning cycles with temperatures oscillating between -130 and 50°C. “The motors are really showing what they’re made of,” Jones happily reports. During the development of the drives, there was nothing else on the market that could come even close to the Faulhaber units, not to mention the fact that Faulhaber is already a go-to partner for the ESA.”

For more information contact David Horne, Horne Technologies, +27 (0)76 563 2084, [email protected], www.hornet.cc



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Pushing technological boundaries with Festo Electric Automation solutions
Festo South Africa Editor's Choice
In the ever-evolving landscape of Industrial Automation, Festo Electric Automation solutions are at the forefront of a revolution, fundamentally reshaping production paradigms. As a global leader in automation, Festo focuses on intelligent connectivity to reduce costs, save time, and increase efficiency and convenience for customers.

Read more...
Perfect balance for every race
Horne Technologies Editor's Choice Electrical switching & drive systems & components
It goes without saying that success in Formula 1 requires a top driver. However, their chance of achieving a place on the podium depends on the car, which in turn depends on three essential factors: engine, tyres and aerodynamics. To find the optimum balance, the racing teams test models of their bolides in the wind tunnel. At Sauber, the adjustable components are moved on the model and in the test chamber using FAULHABER motors.

Read more...
MeerKAT radio telescope array
Editor's Choice News & events
Leading consulting engineering and infrastructure advisory practice, Zutari is continuing its involvement with the world-leading MeerKAT radio telescope array, where it has played a leading role since the project first broke ground.

Read more...
Top 10 emerging technologies
Editor's Choice
The World Economic Forum (WEF) has identified ten technologies likely to make a significant positive impact in the next three to five years. These are detailed in the ‘Top 10 Emerging Technologies’ report, which explains each technology’s potential for addressing global challenges and the factors that will shape the future and revolutionise connectivity still further.

Read more...
Electrifying the future
Parker Hannifin - Sales Company South Africa Editor's Choice Electrical switching & drive systems & components
A revolution is underway, transforming the way we power compact construction machines and heavy-duty mobile machinery. This is the electrification of equipment, a movement propelled by the need for environmental sustainability, lower emissions, reduced noise levels, and the pursuit of a cleaner, greener future.

Read more...
The world’s greatest model railway
Horne Technologies Electrical switching & drive systems & components
Located in Hamburg’s traditional warehouse district, Speicherstadt features the largest model railway in the world, and is one of the most exciting tourist attractions in Germany.

Read more...
How to clean compressed air effectively
Editor's Choice
SO-Reliability Partners has taken another step in bringing to market highly effective solutions to combat contamination in all its forms. The locally designed and patented Air Wizard inline water trap is proudly manufactured in South Africa. It has been SABS tested for the separation of water, oily fluids, rust and solid particulates from pneumatic compressed air or gas lines.

Read more...
New Black Bruin hydraulic motors for heavy-duty applications
Axiom Hydraulics Editor's Choice Hydraulic systems & components
Axiom Hydraulics and Black Bruin have been working together since the late 1990s, serving southern Africa’s fluid power, mining, industrial, agriculture and marine industries. Now Black Bruin is extending its rotating shaft motor portfolio. With a patent pending design, the new X-series is engineered to enhance the performance of both new and existing machinery in terms of durability, serviceability and cost-effectiveness.

Read more...
Quality gearboxes for agriculture
SEW-EURODRIVE Editor's Choice Electrical switching & drive systems & components
Offering a complete gear solution for centre pivot irrigation systems, SEW-EURODRIVE brings its quality products and support as an original equipment manufacturer (OEM) closer to South Africa’s farming sector.

Read more...
Robotic solution for adhesive tape application with flexible control
Beckhoff Automation Editor's Choice Robotics & Mechatronics
In industry, even elaborate processes, such as the application of adhesive tape to parts with varying geometries are automated. Innovative Automation has developed a platform with Beckhoff control technology and a remote feeding module, which increases productivity and enables flexible customisation for different requirements.

Read more...