Editor's Choice


A linear induction motor with a twist

1st Quarter 2016 Editor's Choice Electrical switching & drive systems & components

Just steps from the beach you can launch yourself into a spiralling scream-fest. This is not just a coaster, it’s a double-twisting impulse coaster – one of the tallest and fastest in the world. You’ll be rocked, rolled and launched into two 450° spirals at each end of the tracks. You will be twisted – wickedly. This is the Wicked Twister at Cedar Fair in Sandusky, Ohio, which operates using state-of-the-art linear induction motors (LIMs) to propel riders up to a speed of 115 km/h. Motion Control’s editor, Kim Roberts, spoke to Monty Jasper, corporate vice president for safety and engineering, about the engineering behind the Wicked Twister and its counterpart, the Maverick.

Designed by Intamin, the Wicked Twister consists of two 66 metre tall spikes with 450 degree vertical twists. Between the towers, a horizontal track section incorporates the load and unload area as well as the LIM propulsion system.

Unlike most roller coasters the LIM launches horizontally and thrill seekers are treated to a powerful combination of five launches out of the station, three forwards and twice backwards, while reaching the apex of each vertical tower as it picks up velocity up to 115 km/h from the LIM propulsion system.

Jasper explains that each LIM is like the armature in a normal motor, with wire wrapped around a coil. These are positioned in pairs with a gap of 10 mm between the two blocks. “We pass a 3 mm aluminium fin between them,” he says. “Putting power through the coils results in a magnetic field on either side. Running the fin through them makes the fin want to jump out, thus propelling the train. The fin is on the top of the track and the train is hung from the bottom of the track with people’s legs dangling – there are no floors – while on top, the roller coaster is hanging from its wheels with the aluminium fins passing between the LIMs, which run from the station all down the track. They are powered in sequence and push the train down the track.

“It’s an eerie feeling,” says Jasper, “There is no mechanical contact yet you can feel the force of the magnetic field.” He adds that Cedar Point chose LIMs for Wicked Twister because horizontal launch options are limited and this electrical option is extremely innovative. However, LIMs come with some unique requirements and Cedar Point had to install a dedicated 34 000 V power line to power the coaster. “We’re using such a massive jolt of electricity to operate Wicked Twister that it would be enough to power 550 average-sized homes,” he says.

On the other side of the park is the Maverick, which operates with linear synchronous motors (LSMs). Maverick definitely delivers thrills. It has two cars which go out of the station up a shaft – there is no lift chain. The first hill is set at a 95° angle – that’s 5° past vertical – meaning you feel like you’re going to nosedive off the tracks. It twists and turns, switching back on itself in the first ever twisted horseshoe roll. Just when you think the ride’s over, Maverick hits 112 km/h in three seconds.

Here there is no aluminium fin, instead an energised magnet passes between the coils of two magnets on each side and the repulsion propels the train forward. There are hundreds of these magnetic fields along the track and they are energised as the train approaches and turned off as it passes.

A big advantage of using LIMs and LSMs is that maintenance is reduced. “There are no metal-to-metal contacts, no wear points, no chain moving around, no lubrication, no worn out pieces and parts, because nothing is touching,” Jasper says. “The only things touching are the wheels on the track.”

One difference between the two is that the LIMS are all air cooled, you can hear the fans blowing, while the Maverick is cooled with glycol. “It’s stealthy quiet,” Jasper said. “It’s awe-inspiring to stand there and not hear a sound as it goes up the lift. It’s almost ghostly.” There are also differences in torque and speed. The LIMS is designed for fast lift-off to reach maximum velocity quickly while the LSM allows you to get the height with more power. “This is a great ride experience,“ concludes Jasper. “It feels like flying and it’s very cool.”

For more information visit http://tinyurl.com/jpuceq7





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Compressed air treatment do’s and don’ts
Artic Driers International Editor's Choice Pneumatic systems & components
As a long-established importer and manufacturer of air dryers, Artic Dryers often sees the results of poor installation and issues with aftercoolers that create serious problems in air drying systems.

Read more...
Process control system for the entire plant lifecycle
Siemens South Africa Editor's Choice
The automation of process plants has been characterised by IT silos for a long time. The high level of IT security required was achieved through strict isolation from the outside world. However, this made unlocking the opportunities for digitalisation very difficult. This is a compelling reason to opt for Simatic PCS neo – Siemens’s completely web-based process control system with state-of-the-art IT security concepts.

Read more...
Celebrating 65 years: rebuilding and redefining its legacy
Axiom Hydraulics Editor's Choice News & events
Founded in 1959 by Neill Simpson, Axiom Hydraulics has grown into one of South Africa’s elite hydraulic companies. Over the past six and a half decades they’ve weathered many challenges, but none as devastating as the fire of 2023.

Read more...
Monitoring the health of systems
SA Gauge Editor's Choice Shaft power components
Pressure and temperature gauges are vital instruments in various industries. However, they are susceptible to failures that can compromise their accuracy and reliability. When these gauges fail, the consequences can be severe.

Read more...
PC-based control for advanced hydrogen storage technology
Beckhoff Automation Editor's Choice Electrical switching & drive systems & components
The proportion of renewable energies from solar, wind and water is rising continuously. However, sufficient storage options are of the essence to use these energies as efficiently as possible. GKN Hydrogen offers a particularly compact and safe option, low-pressure metal hydride hydrogen storage systems with PC-based control from Beckhoff.

Read more...
Axiom reaches new heights
Axiom Hydraulics Editor's Choice Electrical switching & drive systems & components
When Rula Bulk Handling could not source a cable tensioner large enough for a new cableway, the engineers knew they had to come up with an inventive solution. After discovering that no such tensioner was immediately available, Rula approached Axiom Hydraulics and ifm to assist with building their own.

Read more...
At least 60 million strokes
Horne Technologies Editor's Choice Electrical switching & drive systems & components
Designing and constructing compact automation systems is one of the core activities of the Austrian machine manufacturer, STIWA. Its modular LTM-CI system has been optimised for small parts assembly. Linear and rotating micromotors from Faulhaber perform key tasks in these systems.

Read more...
Pushing technological boundaries with Festo Electric Automation solutions
Festo South Africa Editor's Choice
In the ever-evolving landscape of Industrial Automation, Festo Electric Automation solutions are at the forefront of a revolution, fundamentally reshaping production paradigms. As a global leader in automation, Festo focuses on intelligent connectivity to reduce costs, save time, and increase efficiency and convenience for customers.

Read more...
Perfect balance for every race
Horne Technologies Editor's Choice Electrical switching & drive systems & components
It goes without saying that success in Formula 1 requires a top driver. However, their chance of achieving a place on the podium depends on the car, which in turn depends on three essential factors: engine, tyres and aerodynamics. To find the optimum balance, the racing teams test models of their bolides in the wind tunnel. At Sauber, the adjustable components are moved on the model and in the test chamber using FAULHABER motors.

Read more...
MeerKAT radio telescope array
Editor's Choice News & events
Leading consulting engineering and infrastructure advisory practice, Zutari is continuing its involvement with the world-leading MeerKAT radio telescope array, where it has played a leading role since the project first broke ground.

Read more...